The pressure and weight produced in the piston rod chamber is the proportional ratio of the unit load per the transformation in the unit piston range and even unit piston rod area

Source: Ningbo Yinzhou Danfeng Machinery Factory  Author :   Time: 2013-11-28

 

　　This design process of the hydraulic cylinder is used when the hydraulic fluid is inserted into the piston rod chamber as well as when the fluid flows effortlessly as if it is not going through any kind of pressure from the area of the piston to the basin or reservoir. Through this processed way and technique, the expansion and retraction process (it is also called push and pull process of the cylindrical process) accomplishment of the hydraulic cylinders are produced.

　　This device is used for manufacturing linear motion and force in solicitations that transfer power. In other words, a hydraulic cylinder transfigures the energy stockpiled in the hydraulic fluid into a power used to exchange the cylinder in a linear direction.

　　Similarly, in single acting cylinder the fluid is under pressure from only one side of the cylinder both during the development as well as the withdrawal process. A spring or an exterior load is used to yield the top of the cylinder in its original place; for instance when heaviness of the fluid is cut off.

Company resources：rivet machine， riveting machine